How to Insulate Your Attic and Save Energy and Lower Your Power Bill

How to plan and insulate the Attic on your own

How to cover the attic and insulate the air so that your home doesn’t sacrifice all the heat it wants this winter to keep you safe. One of the most cost-effective steps is to bring the attic up-to – speed with insulation to make the house be more energy safe. Check this top provider.

Typically, moving to the attic implies one of three things.

  1. You’re ten years old, playing hide-and – seek.
  2. You’re 32 years old and you’ve got one more cherished heirloom to carry forever.
  3. You were 54 years old because you saw a damp patch on the ceiling and you were scared that the roof might leak.

Both of these are valid arguments for entering the attic, but let’s join the attic for now and look at the insulation and decide if installing more insulation will be a smart idea to do-climate heat-lower the electricity bill.

In the early 1980s, construction standards concerning insulation amounts did not even start to take place. There is a fairly decent risk that your attic has limited attic insulation if your house was constructed prior to 1984. Builders didn’t insulate much of it in the 1940’s, builders covered the room between the roof rafters with around 4 inches of insulation in the 1960’s. 8 inches (R-25 to R-30) of loose-fill fibreglass insulation were built by builders in the 1990’s and by the year 2000, insulation standards had hit 12 inches (R-38). Currently, attics are insulated with 16 inches of blown-in fibreglass (R-49), cellulose, or ripped blue jeans, depending on the position of the house.

Yeah, torn blue jeans, I ‘m serious, ripped up blue jeans were built as insulation on a wall.

If you live in a cold environment and you are trying to hold the heat in and the cold out, or whether you live in a warm area and you are trying to keep the cold in and the sun out, attic insulation is energy effective.

The dark dyed, insulating metal fabric is possibly rock fur. A common insulation for the attic in the 50’s and 60’s. Fairly productive and not a threat to health. However, vermiculite asbestos may be insulation granules that are approximately 1⁄4 inch square that sound like Styrofoam that range in colour from mirror bright to black. Owing to the asbestos element, this is terrible things. My advice for attics with vermiculite is to get it extracted safely. Without a licenced contractor ‘s instruction, do not treat or damage this insulation.

Tip-Do n’t play with the circuitry of the knob and conduit and don’t bother with vermiculite. Call in a pro.

You ought to be mindful of the knob and tube wiring if your home was designed prior to 1940. This is clothed connected cabling that is linked to ceramic knobs when it passes through wood framing frameworks or where the wire passes into gaps in the framing or construction material into ceramic tubing. Before insulating, this form of wiring would need to be substituted with new electrical wiring by an electrician. If you insulate directly through the wiring of the knob and channel, the wire will heat up and generate a risk of fire.